We design and install home theaters for Lancaster County homes — Dolby Atmos surround sound, 4K projectors, properly calibrated AV receivers, and speaker placement that makes the room work. Not just hardware on a shelf.
We handle the full system — receiver, speakers, display, source devices, wiring, and calibration. You don't need to coordinate multiple installers.
The brain of the system. The receiver decodes Dolby Atmos and DTS:X, powers all your speakers, switches between sources (Apple TV, Blu-ray, game console), and runs room calibration. We spec the right receiver for your channel count and room size — not the cheapest one that fits the box.
Speakers are where the money shows. We use Klipsch for rooms that need high efficiency and dynamics (horn-loaded tweeters, loud and clear), Polk Audio Signature Elite for value-focused builds, and SVS for reference-grade setups. For Atmos height channels, we install in-ceiling speakers flush with the ceiling — no upfiring modules needed.
Bass you feel, not just hear. A good subwoofer does more than add thump — it handles everything below 80 Hz so your main speakers focus on midrange and highs, which dramatically improves the whole system. SVS subwoofers are our go-to: sealed for tight, accurate bass in medium rooms; ported for maximum output in larger spaces.
For dedicated rooms, a projector gives you a 110"–150" image for less than a comparable TV at that size. We use Epson for bright, reliable 4K performance at mid-range budgets, BenQ for high-contrast dark room setups, and Sony for premium installs. Screens are fixed-frame (Elite Screens, Screen Innovations) for the cleanest look and best image flatness.
The display and speakers are only as good as the source feeding them. We install and configure Apple TV 4K (best for Apple households, Dolby Vision + Atmos), Nvidia Shield Pro (best Android streaming box, AI upscaling), and 4K Blu-ray players for the highest possible quality. Everything connects via HDMI 2.1 for full 4K/120Hz and eARC support.
One button or one voice command should do it all: dim the lights, close the shades, power on the receiver and TV, switch to the right input, and start your movie. We wire the theater room into your smart home system and configure universal remotes or app-based control so nobody needs a manual to watch a movie.
Carry the bulk of movie and music output and set the stereo image. Positioned at ear height, angled slightly inward toward the main seating position for the tightest, most accurate soundstage.
Carries most movie dialogue and on-screen effects. Matched to the same line as the front L&R so voices sound consistent with the rest of the mix, not thin or boxy by comparison.
Fill in ambient sound and directional effects — footsteps, rain, off-screen action — so the room feels alive instead of just loud up front. Mounted at or slightly above ear height, aimed at the seating area.
Handles everything below 80 Hz — explosions, engine rumble, low bass in music — so the other speakers aren't straining to reproduce frequencies they were never built for. Corner placement reinforces output; we fine-tune from there based on the room.
The same front-stage layout as a 5.1 system, built to carry Dolby Atmos' expanded dynamic range without strain at reference volume.
Sit level with the main seating row, delivering the same side-field ambience as a 5.1 setup but tuned to blend seamlessly with the height channels overhead.
Add a rear layer behind the seating position, so effects can travel fully around the room instead of stopping at the sides — the difference between “surround” and true 360-degree sound.
The defining feature of a 7.1.4 setup — in-ceiling modules (or upfiring add-ons) placed above and slightly ahead and behind the seating position, adding a full overhead layer for rain, aircraft, and other object-based effects.
A single sub covers most rooms fine, but a second sub on an opposite wall evens out bass response across every seat — eliminating the dead spots one sub can create in larger or irregularly shaped rooms.
The receiver fires pink noise through each speaker individually so it can identify each one and measure its output independently.
We place the included Audyssey microphone at 8 positions across your seating area. The receiver captures room reflections, distance, and frequency response at each position.
Audyssey sets exact distance to each speaker (so sound from all speakers arrives at your ears at the same time) and adjusts volume levels to match.
MultEQ XT32 applies a high-resolution EQ curve that corrects for room modes — those frequency peaks and dips caused by wall reflections that make bass boom or go missing in certain spots.
We review the Audyssey results and adjust where needed — particularly the subwoofer crossover point and any speaker-specific settings the auto-cal doesn't nail.
We run test content through the whole system — dialogue, action sequences, music — and verify it sounds right before we call it done.
Speaker wire, HDMI, and power run through the wall or under trim. We don't leave cables on the floor or running across baseboards.
Speaker placement matters more than brand. We design the layout for your room's dimensions before we quote hardware — not the other way around.
Audyssey or YPAO calibration is included on every receiver install. We don't just rack the gear and walk out.
If something goes wrong a month after install, we come back. We're not a big-box crew that disappears after the job.
Most home theater problems are setup problems, not hardware problems. A $1,200 receiver with proper calibration and speaker placement beats a $3,000 receiver thrown in a room with no tuning. We do the setup work that makes the difference.
We'll come out, look at your room, and design a system that fits your space and your budget. No sales pressure — just an honest quote from a local installer who does this every week.
